Inside 750W Brushless Motor Driver
- RAJ SHARMA
- 3 days ago
- 1 min read
Brushless Motor Driver DC24-48V 750W (BLDC) Modbus RTU Compatible
Features:
ARM based high speed controller design.
Alarm output on error.
Can be controlled by PLC, PC Software, Microcontroller, SBC or any other device which can communicate with RTU Modbus.
Its also possible to operate without any controller using Onboard or external potentiometer, PWM, Pulse etc.
In Analog Speed Control mode Current, Speed and Acceleration can be set by using 3 potentiometers available on drive. Current setting range is 4A - 30A.
In Analog Speed Control mode direction can be changed by connecting F/R pin to COM pin of drive.
Over current, over voltage, under voltage protection.
In this drive torque output and speed is stable at high speed.
Up to 15 slaves is available through switch setting, upto 15 motors can be controlled using a single modbus line.
When the power is turned on, the drive can start running motor automatically if enable is connected.
When break applied motor stops motion if it is running but it will not hold torque.
Comments